Promise Technology M310p User Manual
Chapter 6: Maintenance
175
Replace Cache Battery
The cache battery is located in the Cooling Unit 1 (the left one). The battery
assembly is replaced as an individual part. No tools are required for this
procedure.
assembly is replaced as an individual part. No tools are required for this
procedure.
To replace a cache battery:
1.
Press the release button and pull the handle downward as shown above.
2.
Pull the cooling unit out of the VTrak enclosure.
Cautions
•
•
The battery assembly is replaced as a unit. Do not attempt to
disconnect the battery by itself.
disconnect the battery by itself.
•
Installing an incorrect replacement battery may result in an
explosion.
explosion.
•
Dispose of used batteries according to the instructions that
accompany the battery.
accompany the battery.
•
While the battery is removed, your system will be vulnerable
to a power failure. Temporarily set your cache policy to write-
through before starting this procedure. See “Logical Drive
Settings” on page 107 (WebPAM PROe) or “Logical Drive
Settings and Functions” on page 148 (CLU).
to a power failure. Temporarily set your cache policy to write-
through before starting this procedure. See “Logical Drive
Settings” on page 107 (WebPAM PROe) or “Logical Drive
Settings and Functions” on page 148 (CLU).
•
If power service has failed, do not remove the cooling unit if
the Controller’s Dirty Cache LED is flashing. See “Unsaved
Data in the Controller Cache” on page 236.
the Controller’s Dirty Cache LED is flashing. See “Unsaved
Data in the Controller Cache” on page 236.