Promise Technology M310p User Manual
Chapter 4: Management with WebPAM PROe
83
Enclosure Settings
The Enclosure–Settings tab enables you to make settings for certain components
of the VTrak subsystem enclosure. To make Enclosure settings:
of the VTrak subsystem enclosure. To make Enclosure settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click on the Enclosures
icon.
3.
Click on the Enclosure
icon.
4.
Click on the Settings tab in Management View.
5.
Enter a polling interval (15 to 255 seconds) in the Polling Interval field.
6.
Enter a value in the Enclosure Warning Temperature Threshold field.
7.
Enter a value in the Enclosure Critical Temperature Threshold field.
8.
Enter a value in the Controller Warning Temperature Threshold field.
9.
Enter a value in the Controller Critical Temperature Threshold field.
10. Click the Submit button.
The changes take effect immediately.
FRU VPD
The Enclosure–FRU VPD tab displays Vital Product Data (VPD) information
about Field Replaceable Units (FRU) in the VTrak subsystem enclosure,
including:
about Field Replaceable Units (FRU) in the VTrak subsystem enclosure,
including:
•
Controller Motherboard
•
Battery Backup Unit (BBU)
•
Cooling Units
•
Power Supply Units
•
Back Plane
Use this information when communicating with Technical Support and when
ordering replacement units. For contact information, see “Contact Technical
Support” on page 239.
ordering replacement units. For contact information, see “Contact Technical
Support” on page 239.
To access Controller information:
1.
Click the Subsystem
icon in Tree View.
2.
Click on the Enclosures
icon.
3.
Click on the Enclosure
icon.
4.
Click on the FRU VPD tab in Management View.