Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-643
ERR-LOG (Error Log)
10
ERR-LOG (Error Log)
Functional Description
The ERR-LOG MO is responsible for the sanity of the Alarm Log, the Hardware
Error Log, and the Software Error Log. If an inconsistency is detected in any one
of these logs, all logs are re-initialized and a hardware error is logged against
ERR-LOG indicating the time of inconsistency. There are no tests and no alarms
for the Error Log MO. This MO exists solely for the purpose of allowing errors to
be logged against it.
Error Log, and the Software Error Log. If an inconsistency is detected in any one
of these logs, all logs are re-initialized and a hardware error is logged against
ERR-LOG indicating the time of inconsistency. There are no tests and no alarms
for the Error Log MO. This MO exists solely for the purpose of allowing errors to
be logged against it.
Hardware Error Log Entries and Test to Clear
Values
Values
Notes:
a. This error indicates that an inconsistency was detected in either the Alarm
Log, the Hardware Error Log, or the Software Error Log. To recover from
this error, all of the logs were cleared and re-initialized. Any alarms that
were active at the time of this error have been cleared. There is no
associated test for this error. If the error persists, escalate the problem.
this error, all of the logs were cleared and re-initialized. Any alarms that
were active at the time of this error have been cleared. There is no
associated test for this error. If the error persists, escalate the problem.
The Aux data value indicates when the inconsistency was found:
1.
Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to
the appropriate test description and follow the recommended procedures.
the appropriate test description and follow the recommended procedures.
MO Name As It
Appears in
Alarm Log
Alarm Level
Initial System
Technician
Command to Run
Full Name of MO
ERR-LOG
none
none
Error Log
Error Log Error Log Entries
Error
Type
Type
Aux
Data
Associated Test
Alarm
Level
On/Off
Board
Test to Clear Value
0
1
Any
Any
Any
Any
none
510 (a)
Any
none
none
none
none
0
Found during a periodic audit of the Error Log
1
Found after an extended reboot
Continued on next page