Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1356
TAPE (Tape Unit) [G3iV1.1-286]
10
Tape Reset Test (#67)
This test resets the tape portion of the Processor on the Maintenance/Tape
Processor (PR-MAINT), and it resets the shared RAM on the Processor circuit
pack (TN770). The test can pass when no drive is present because it never
accesses the tape drive.
Processor (PR-MAINT), and it resets the shared RAM on the Processor circuit
pack (TN770). The test can pass when no drive is present because it never
accesses the tape drive.
Table 10-409.
TEST #66 Tape Diagnostic Test
Error
Code
Test
Result
Description/ Recommendation
1029 to
2051
2051
ABORT
Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
documentation for a description of these error codes.
9000’s
ABORT
or FAIL
or FAIL
Refer to Table A in
and follow the recommended repair strategy for
specific Aux Data.
Any
Others
Others
ABORT
or FAIL
or FAIL
Refer to Table B in
and follow the recommended repair strategy for
specific Aux Data.
PASS
This is a comprehensive test of the Tape Unit. The test
verifies that the tape drive is in good working order.
verifies that the tape drive is in good working order.
Continued on next page
Table 10-410.
TEST #67 Tape Reset Test
Error
Code
Test
Result
Description/ Recommendation
1029 to
2051
2051
ABORT
Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
documentation for a description of these error codes.
9000’s
FAIL
Refer to Table A in
and follow the recommended repair strategy for
specific Aux Data.
Any
Others
Others
FAIL
Refer to Table B in
and follow the recommended repair strategy for
specific Aux Data.
PASS
Communication with the tape processor is possible at a
very basic level.
very basic level.
Continued on next page