Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1480
TONE-BD (Tone-Clock Circuit Pack)
10
TONE-BD (Tone-Clock Circuit Pack)
The Tone-Clock circuit pack functionality is provided by two independent objects
in the same circuit pack. The tone generator provides all the tones needed by the
system and the clock generates the system clocks for the Time Division Multiplex
(TDM) Bus and aids in monitoring and selecting internal synchronization
references.
in the same circuit pack. The tone generator provides all the tones needed by the
system and the clock generates the system clocks for the Time Division Multiplex
(TDM) Bus and aids in monitoring and selecting internal synchronization
references.
When resolving errors/alarms on the Tone-Clock circuit pack, the following
should be used also:
should be used also:
■
TONE-PT (Tone Generator) Maintenance documentation.
■
TDM-CLK (TDM Bus Clock) Maintenance documentation.
■
SYNC (Synchronization) Maintenance documentation.
The TN2182 is a combined Tone-Clock-Detector circuit pack which contains a
third independent function not available on the TN768 or TN780. The TN2182
contains 8 ports used for all-purpose tone detection. These ports are called
Enhanced Tone Receiver ports (ETR-PT) and are described in the
documentation for ETR-PT.
third independent function not available on the TN768 or TN780. The TN2182
contains 8 ports used for all-purpose tone detection. These ports are called
Enhanced Tone Receiver ports (ETR-PT) and are described in the
documentation for ETR-PT.
Tone-Clock Circuit Packs and System Reliability
Options
Options
The following sections describe the relationship between the various System
Reliability Options and Tone-Clock circuit pack configurations.
Reliability Options and Tone-Clock circuit pack configurations.
Standard Reliability Option
Systems with the Standard Reliability Option (no duplication options) have one
Tone-Clock circuit pack in each port network (PPN and EPN). For the PPN or the
EPN this is in the A carrier. This Tone-Clock circuit pack generates clocks and
provides system tones for all carriers of the port network it resides on.
Tone-Clock circuit pack in each port network (PPN and EPN). For the PPN or the
EPN this is in the A carrier. This Tone-Clock circuit pack generates clocks and
provides system tones for all carriers of the port network it resides on.
1.
P is the port network number (1 for PPN, 2-3 for EPNs). C is the carrier designation (A, B,
C, D, or E).
C, D, or E).
MO Name
As It
Appears in
Alarm Log
Alarm
Level
Initial System
Technician Command
to Run
1
Full Name of MO
MAJOR
test tone-clock PC
Tone-Clock Circuit Pack
TONE-BD
MINOR
test tone-clock PC
Tone-Clock Circuit Pack
TONE-BD
WARNING
release tone-clock PC
Tone-Clock Circuit Pack