Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-138
display synchronization
8
Synopsis
display synchronization [ print | schedule ]
Permissions
The following default logins may execute this command: system technician,
inads, cust, rcust, bcms, init, browse.
inads, cust, rcust, bcms, init, browse.
Examples
display synchronization
display synchronization print
display synchronization schedule
display synchronization print
display synchronization schedule
Description
The display synchronization command will bring up the synchronization form.
The administered synchronization stratum and reference sources will be
displayed on this form. This command does not allow for any changes to be
made to the system synchronization.
The administered synchronization stratum and reference sources will be
displayed on this form. This command does not allow for any changes to be
made to the system synchronization.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "display time" the following
message will be displayed:
message will be displayed:
[’print’ or ’schedule’]
print
This will cause the report to be printed if a printer is linked to the SAT.
schedule
When the "schedule" option is specified, the command is validated and then
a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then placed in the command
queue and is executed at the specified time. The information displayed by
the command is sent to the system printer instead of the screen.
a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then placed in the command
queue and is executed at the specified time. The information displayed by
the command is sent to the system printer instead of the screen.