Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-207
list mst
8
Packet (D92)
Message type:
0x32 uplink
Message format:
Message type:
0x33 downlink
Message format:
ASAI
ASAI messages listed on the MST screen consist of a 4 octet header and a
variable length body. The header contains the ASAI port address encoded with 8
hexadecimal digits. This same encoding is also used for BRI and PRI.
variable length body. The header contains the ASAI port address encoded with 8
hexadecimal digits. This same encoding is also used for BRI and PRI.
In message types other than 50 and 51 (Level 2 Primitives), following the port
address is a one octet field called the qualifier. The meaning of the qualifier
varies according to the type (as specified by the MST encode) of ASAI message
address is a one octet field called the qualifier. The meaning of the qualifier
varies according to the type (as specified by the MST encode) of ASAI message
Message[7]
= message length
Message[8]
= angel id
Message[9+]
= standard CCMS message
Message[1-4]
= user identifier
Message[5-6]
= hook identifier (defined in $BASEPJ/hdrs/mstencode.h)
Message[7-10]
= link identifier
Message[11-12]
= message type (defined in $BASEPJ/hdrs/pcd_calls.h)
Message[13+]
= standard packet message
Message[1]
= port network number
Message[2]
= endpoint number
Message[3]
= angel number
Message[4]
= circuit number
Message[5-6]
= hook identifier (defined in $BASEPJ/hdrs/mstencode.h)
Message[7-10]
= link identifier
Message[11+]
= standard packet message