Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-220
list mst
8
NOTE:
The Link ID has no meaning for the link establish request, therefore the Link
ID field will contain 0xff 0xff 0xff 0x.ff
The Link ID has no meaning for the link establish request, therefore the Link
ID field will contain 0xff 0xff 0xff 0x.ff
NOTE:
The cancel byte will only be present if the message was built, but could not
be sent.
The cancel byte will only be present if the message was built, but could not
be sent.
0x6C - ISDN PRI level 2 uplink primitive
R1/R3 change types:
0x01 - session up notification
0x02 - Session down notification
0x6D - ISDN PRI level 2 downlink primitive (not implemented)
0x01 - session up notification
0x02 - Session down notification
0x6D - ISDN PRI level 2 downlink primitive (not implemented)
Message[11]
= Downlink encode
0x01 - BRI Link Events
0x02 - TEI Management Message
0x03 - XID Message
0x01 - BRI Link Events
0x02 - TEI Management Message
0x03 - XID Message
Message[12]
= BRI Link Events:
0x02 - link release request
0x0f - link establish request sent to and received by
the lower level
0x02 - link release request
0x0f - link establish request sent to and received by
the lower level
= TEI Management Message
0x02 - Identity Assigned
0x04 - Identity Check Request
0x06 - Identity Remove
0x02 - Identity Assigned
0x04 - Identity Check Request
0x06 - Identity Remove
= XID Messages
0x01 - XID Request
0x02 - XID Response
0x01 - XID Request
0x02 - XID Response
Message[13]
= 0xCA - Cancel Byte
Message[1]
= Port Network Number of D-channel port
Message[2]
= Reserved
Message[3]
= Carrier Address of D-channel port
Message[4]
= Port number of D-channel port
Message[5]
= change type
Message[1]
= Port Network Number of D-channel port
Message[2]
= Reserved