Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-274
release board
8
release board
This command will release each maintenance object on the specified board.
Synopsis
release board location
Permissions
The following default logins may execute this command: system technician,
inads, init, nms.
inads, init, nms.
Examples
release board 01c11
release board 02c15
release board 02c15
Description
The release board command will put every administered maintenance object on
the circuit pack at the specified location into operation. Some tests are done on
the object to make sure that it can be used.
the circuit pack at the specified location into operation. Some tests are done on
the object to make sure that it can be used.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses
HELP
after entering "release board," the following
message will be displayed:
Enter 5 character board number
location
A "location" represents the physical position of the board to be busied
out or released and is entered as "UUcSS" where "UU" represents the
cabinet number (1-3), "c" represents the carrier, and "SS" represents
the slot position.
out or released and is entered as "UUcSS" where "UU" represents the
cabinet number (1-3), "c" represents the carrier, and "SS" represents
the slot position.