Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-296
release port
8
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
release port 01c1101
release port 02c1501
release port 02c1501
Description
The release port command will remove the specified port on a circuit pack from a
maintenance busy state.
maintenance busy state.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses
HELP
after entering "release port," the following
message will be displayed:
Enter 7 character port number
Error Messages
If the format of the port location is incorrect, the following error message will be
displayed:
displayed:
Port/Board invalid
If the EPN on which the port resides is unavailable, the following message will be
displayed:
displayed:
EPN is not available
If the board on which the port resides is not administered, the following error
message will be displayed:
message will be displayed:
Port not assigned
location
A "location" represents the physical position of the port to be released
and is entered as "UUcSSpp" where "UU" represents the cabinet
number (1-3), "c" represents the carrier, "SS" represents the slot
position, and "pp" represents the circuit (port).
and is entered as "UUcSSpp" where "UU" represents the cabinet
number (1-3), "c" represents the carrier, "SS" represents the slot
position, and "pp" represents the circuit (port).