Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-303
release spe-standby
8
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
release spe-standby
Description
The release spe-standby command removes the busyout status of the standby
SPE. Memory shadowing will be restored, a memory refresh of the standby SPE
will occur and 1 minute later the equivalent of scheduled standby SPE
maintenance will be performed which will return the standby SPE’s Fault Severity
Level to the appropriate value.
SPE. Memory shadowing will be restored, a memory refresh of the standby SPE
will occur and 1 minute later the equivalent of scheduled standby SPE
maintenance will be performed which will return the standby SPE’s Fault Severity
Level to the appropriate value.
Release of the standby SPE will be allowed if communication to the standby is
down.
down.
Defaults
No defaults.
Parameters
None.
Help Messages
If the system technician presses
HELP
after entering "release spe-standby" the
following message will be displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict