Lucent Technologies R5SI User Manual

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-309

release tdm 

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy; 

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

For the following output example, assume that the command that was entered is 
"release tdm port-network 1 bus a."

If a bus is busied out, no calls will be torn down. However, no new calls will be set 
up on the busied out bus.

Dedicated tone time slots must be moved to another bus (the other half of the 
duplicated bus) before a busyout of a particular bus will be allowed.

Port

The port network number (preceded by "PN") and the bus ("A" or 
"B") associated with the TDM bus.

Maintenance Name

TDM-BUS is the maintenance object being released.

Alt. Name

Not applicable.

Result

The result of the release -"PASS," "ABORT," "FAIL,"

Error Code

A system-generated number that tells why the release failed or 
aborted. A detailed list of the codes can be in the 
"Busyout/Release Commands" section of this chapter.

 
 release tdm port-network 1 bus a

                         COMMAND RESULTS

 Port     Maintenance Name   Alt. Name   Result    Error Code
 PN 01A       TDM-BUS                    PASS

 Command successfully completed