Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-315
reset board
8
Feature Interactions
None.
reset board
This command will reset the specified board.
Synopsis
reset board location
repeat number
Permissions
The following default logins may execute this command: system technician,
inads, init, nms.
inads, init, nms.
Examples
reset board 01c11
reset board c08
reset board 03d12 r 3
reset board c08
reset board 03d12 r 3
Description
The reset board command will perform a soft (i.e. software) reset of every
administered port on the port circuit pack at the specified location. All ports must
be busied out before the port circuit pack is reset. The most efficient way of
doing this is to perform a busyout of the board before resetting it.
administered port on the port circuit pack at the specified location. All ports must
be busied out before the port circuit pack is reset. The most efficient way of
doing this is to perform a busyout of the board before resetting it.
!
WARNING:
This command is service disrupting and may cause extraneous alarms.
release trunk 78/1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1505 CO_TRK 78/01 PASS
01C1505 CO_TRK 78/01 PASS
Command successfully completed