Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-342
save translation
8
this command is not allowed at this time
If the user chooses that save be done on the standby processor, and the standby
processor is inaccessible, then the following message will be displayed:
processor is inaccessible, then the following message will be displayed:
Cannot access the standby SPE at this time
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
Output
The responses will be displayed on an SPE basis with one line of data displayed
for each SPE.
for each SPE.
For the following output example, assume that the command, save translation is
done on a duplex system.
done on a duplex system.
Feature Interactions
The save translation cannot be performed if translation data is being changed by
an administration command.
an administration command.
Processor
This identifies the processor carrier that was translation
data was saved to. (i.e. SPE-A, or SPE-B).
data was saved to. (i.e. SPE-A, or SPE-B).
Command Completion Status
This may display a variety of messages, to identify the
success or failure of the command on the given
processor:
success or failure of the command on the given
processor:
save translation
SAVE TRANSLATION
Processor Command Completion Status Error Code
SPE-A Success 0
SPE-B Success 0
SPE-A Success 0
SPE-B Success 0
Command Successfully Completed