Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-454
status hardware-group
8
status hardware-group
This command displays the status of the hardware group maintenance test.
Synopsis
status hardware-group
print
Permissions
The following default logins may execute this command: bcms, browse, system
technician, inads, cust, init, rcust.
technician, inads, cust, init, rcust.
Examples
status hardware-group
status hardware-group print
status hardware-group print
Description
Summary information on the active or last hardware group tests will be displayed.
This display includes the number and percentage of maintenance objects tested,
the percentage of tests passed, failed, and aborted, the time elapsed since
initiating the hardware group test, the specific hardware group test command
(see
This display includes the number and percentage of maintenance objects tested,
the percentage of tests passed, failed, and aborted, the time elapsed since
initiating the hardware group test, the specific hardware group test command
(see
command) initiated, and the state
(active/canceled/complete) of the hardware-group test.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses
HELP
after entering "status hardware-group", the
following message will be displayed:
[’print’]
print
This will cause the report to be printed if a printer is linked to the SAT.