Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-483
status packet-control
8
Feature Interactions
None.
status packet-control
This command displays the status of the specified packet-control.
Synopsis
status packet-control
location
Permissions
The following default logins may execute this command: system technician,
inads, init, nms
inads, init, nms
trace status
Can be "enabled", "disabled by command", "disabled by
timer", "disabled by buffer full", "disabled by stop trigger or
count" or "disabled by restart".
timer", "disabled by buffer full", "disabled by stop trigger or
count" or "disabled by restart".
trigger status
Can be "none", "not triggered", "triggered".
Pending stop count
This field will have a value in it whenever it is actually being
used. The value will indicate the number of messages to
be collected before stopping the trace.
used. The value will indicate the number of messages to
be collected before stopping the trace.
Enable trace time
The time the trace was enabled.
Disable trace time
The time the trace was disabled or will be disabled by the
run time limit.
run time limit.
Percent of current wrap
The percentage of the buffer that has been written since
the last wraparound.
the last wraparound.
Wraparound count
The number of times that the buffer has wrapped around.
This will initially be 0.
This will initially be 0.
Oldest message number
The sequence number of the oldest message in the trace.
Newest message number
The sequence number of the newest message in the trace.
Completed snapshots
The number of complete snapshots that have been
collected.
collected.