Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-610
test link
8
Output
If the command is successful, the following message will be displayed:
Command successfully completed
Feature Interactions
None.
test link
This command will perform a set of hardware diagnostic tests on the specified
link.
link.
Synopsis
test link link-id
[ short | long ][ repeat number | clear ] schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
test link 1
test link 1 schedule
test link 3 l
test link 2 sh
test link 2 r 2
test link 2 l c
test link 1 schedule
test link 3 l
test link 2 sh
test link 2 r 2
test link 2 l c
Description
The test link command will validate that the link specified is administered. Then
the tests for a link will be executed on the specified link. The results of the test
along with any possible error codes are displayed.
the tests for a link will be executed on the specified link. The results of the test
along with any possible error codes are displayed.
Defaults
The default for the command is short with the repeat of 1.