Lucent Technologies R5SI User Manual

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-684

upgrade software 

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

For the following output example, the command that was entered was "test 
tsc-administered 1/1".

Additional data is available after running the test. See the status tsc-administered 
command for details on how to access the additional data.

This command allows the software text image, the flash component of the LMM 
firmware, the MTP firmware, the Packet Control (PACCON) and the Processor 
Interface (PI) firmwares to be upgraded. Save translation must be done before 
this command.

Port

The port address of the administered temporary signaling 
connection that is being tested (signaling group no/tsc index).

Maintenance Name

The type of maintenance object that is being tested.

Alt. Name

Not applicable.

Test No

The actual test that is being executed.

Result

The result of the individual test -"PASS," "ABORT," "FAIL," "NO 
BOARD," "DISABLED," "EXTRA BD."

Error Code

A system-generated number that tells why the test failed or 
aborted. A detailed list of the codes according to "Test No." is 
provided for each MO (for example, see MO section "TSC-ADM 
(Administered Temporary Signaling Connections)").

 
 test tsc-administered 1/1

                              TEST RESULTS

   Port    Maintenance Name  Alt. Name Test No. Result       Error Code
   1/1     TSC-ADM                     604      PASS

 Command Successfully Completed