Renesas M16C/29 User Manual
2. Connection
11
Now connect the E8a to J5/E8 on the RSK using the ribbon cable.
12
Connect the E8a module to a spare USB port.
The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note that administrator privileges are
required for a Windows™ 2000/XP machine. Do not use the Windows Update to locate the driver.
required for a Windows™ 2000/XP machine. Do not use the Windows Update to locate the driver.
13
Verify the “Recommended” option is selected and click <Next>.
14
If using Windows XP, skip to step 16; otherwise click <Next>.
15
Click <Next> to install the driver.
16
Click <Finish> to close the wizard.
Note: The Windows driver signing dialog may be displayed. Please accept the driver to continue.
3. HEW
Workspace
HEW integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on how to use
HEW, open the HEW manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual
Navigator).
17
Launch HEW from the Start Menu. (Start Menu > All Programs > Renesas > Renesas High-performance Embedded Workshop).
18
In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK>
19
In the “New Project Workspace” dialog box: Set the “CPU Family” to “M16C”, and verify the “Tool chain” is set to “Renesas M16C Standard” .Select
“E8A_RSKM16C29” from the left hand pane.
“E8A_RSKM16C29” from the left hand pane.
20
Enter a name for the workspace. The project name will be automatically completed with the Workspace name. You can change this name to
‘Tutorial’ if required. Click <OK>.
‘Tutorial’ if required. Click <OK>.
21
On the “E8A_RSKM16C29– Step 1” window: Select “Tutorial” and click <Next>.
22
On the “E8A_RSKM16C29– Step 2” window: Click <Finish>.
23
On the Project Generator Information window: Click <OK>.
The project that is created has two configurations. The Release configuration can be used for the final release code version. The Debug
configuration allows modifications to the configuration for debugging.
configuration allows modifications to the configuration for debugging.
24
Select the Debug build configuration in the left hand drop down list on the
tool bar.
tool bar.
25
Click on the ‘Build’ icon to compile, assemble and link the
project.
project.
D006174_11_S01_V04