Manualsbrain.com
  1. Manuals
  2. Brands
  3. Renesas
  4. 32185
  5. User Manual

Renesas 32185 User Manual

Download
Page of 89
32185/32186/32192/32195/32196 Group 
Starter Kit User’s Manual M3A-2154G52B 
REJ10B0223-0140/Rev.1.40 
Jan. 2007 
Page 11 of 79 
 
5.1.2  M3A-2154 Evaluation Board Power Supply and Setting 
The following shows how to set the M3A-2154 Evaluation Board.   
Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board.     
Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector 
included with the M3A-2154 Evaluation Board.   
The Connecting when Feeding Power to the M3A-2154 Evaluation Board is shown in Figure 5.2. 
 
 
 
 
 
 
 
 
 
 
 
Figure 5.2    Connecting when Feeding Power to the M3A-2154 Evaluation Board 
 
5.1.3  Connecting M3A-2154 Evaluation Board and M32100T-EZ-E 
Use an included 10-pin flat cable to connect M32100T-EZ-E and XCN1 connector included with 
the M3A-2154 Evaluation Board.   
The Connecting M3A-2154 Evaluation Board and M32100T-EZ-E is shown in Figure 5.3. 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 5.3    Connecting M3A-2154 Evaluation Board and M32100T-EZ-E 
 
5.1.4  Power Supply when Connecting M32100T-EZ-E 
- 
When turning on power, turn on M32100T-EZ-E first and then the M3A-2154 Evaluation 
Board. 
- 
When turning off power, turn off the M3A-2154 Evaluation Board first and then 
M32100T-EZ-E. 
When turning on power again after turning off power, wait for 10 seconds. 
- 
Power to M32100T-EZ-E can be fed from USB cable. 
 
 
 
Note: Unless the Starter Kit is powered on this sequence, the kit may operate erratically or break down. 
 
4.75-5.25V DC  power supply
M3A-2154 evaluation board
CN2
M3A-2154 evaluation board
XCN1
10-pin flat cable
M32100T-EZ-E
SDI I/F