Siemens C79000-G8976-C156-07 User Manual
16
Configuration Console Tool
224
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
16.3
Editing the Configuration
Overview
During configuration you can do the following:
S
Change the mode of the module and set the index
S
Set the Industrial Ethernet network parameters
S
Set the Industrial Ethernet station addresses for the CP 1613
S
Assign the application access points to the individual modules
S
Set the PROFIBUS DP slave mode
16.3.1
Changing the Mode of a Module
When you first commission a module (initial configuration), the mode is specified
by using the Station Configuration Editor.
by using the Station Configuration Editor.
Under some circumstances, it may be useful to change the operating mode of the
module:
module:
S
If you want to use the module for other purposes
S
If the bus parameters of the network were changed and you want to adapt the
module to these parameters
module to these parameters
S
If you want to process the module again with the Commissioning Wizard
If you want to change the operating mode of a module.....
Activity
1
Open the “Modules” folder in the navigation area.
Select the required module.
Click on the “General” property object.