DELL 1950 User Manual

80

Installing System Components

Figure 3-20.

Installing a SATA Hard Drive Into a SATA Drive Carrier

Installing a SATA Hard Drive and Interposer Card Into a SATAu Hard-Drive Carrier

 

NOTE: 

When you install a SATA hard drive into a SATAu drive carrier, you must install an interposer card onto 

the back of the hard drive. The SATAu drive carrier is labeled "SATAu" and also has marks indicating the SAS and 
SATA mounting screws.

1

Insert the SATA hard drive into the SATAu hard-drive carrier with the connector end of the drive at the 
rear. See Figure 3-21.

2

Viewing the assembly as shown in Figure 3-21, align the bottom rear screw hole on the hard drive with 
the hole labeled "SATAu" on the hard drive carrier.

When aligned correctly, the rear of the interposer will be flush with the rear of the hard-drive carrier.

3

Attach the four screws to secure the hard drive to the hard-drive carrier. See Figure 3-21.

1

screws (4)

2

SATA drive carrier

3

SATA hard drive

1

3

2