DFI 40800950 User Manual

Introduction

Dual Function Power Button

Depending on the setting in the Soft-Off By PWR-BTTN field of

the Power Management Setup, this switch will allow the system to

enter the Soft-Off or Suspend mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or Soft

Power Off mode to wake-up/power-on to respond to calls coming

through an internal or external modem. Refer to Wake-On-Ring

Connector in chapter 2 for more information.

RTC Timer to Power-on the System

The RTC installed on the system board allows your system to

automatically power-on on the set date and time.

Wake-On-LAN Ready

The Wake-On-LAN function allows the network to remotely wake

up a Soft Power Down (Soft-Off) PC. Your LAN card must support

the remote wakeup function. Refer to Wake-On-LAN Connector in

chapter 2 for more information.

Important:

The 5VSB power source of your power supply must support a

minimum of 1.5A.

Wake-On-Keyboard/Wake-On-Mouse

This function allows you to use the keyboard or PS/2 mouse to

power-on the system. Refer to Jumper Settings for Wake-On-

Keyboard/Wake-On-Mouse in chapter 2 and Keyboard/Mouse

Power On in the Integrated Peripherals section in chapter 3 for

more information.

Important:

The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals submenu. You must type

the correct password to power-on the system. If you forgot

the password, power-off the system and remove the