Delta Electronics PCI-DMC-B01 User Manual
![Delta Electronics](https://files.manualsbrain.com/attachments/17fa3c91ba74a30989b63719f51e4026476279fa/common/fit/150/50/398e3d195810ebcccb4b38ddc327372d4d2d7eb94f9ca6f971ee02d46039/brand_logo.gif)
Chapter 3 Operating Principles | PCI-DMC-A01 / PCI-DMC-B01
3-6
Revised March, 2012
4) Write servo parameter
Figure 3.10
As shown in Fig. 3.10, if you wish to write a parameter value to servo then you must
input the desired value in the edit box and then click on the “Write” button to execute
the following procedure:
input the desired value in the edit box and then click on the “Write” button to execute
the following procedure:
rt = _DMC_01_write_servo_parameter(gDMCCardNo, NodeID, SlotID, group, idx,
data);
data);
//The value will be written to the servo group parameter you set. Please refer to the
previous section for a detailed description.
previous section for a detailed description.
5) Exit procedure
Click on the “Exit” button to quit and exit the procedure.
“_DMC_01_reset_card” and “_DMC_01_close” must be executed to exit this
function. Please refer to Section 3.12 “Exit procedure” for the function operations.
“_DMC_01_reset_card” and “_DMC_01_close” must be executed to exit this
function. Please refer to Section 3.12 “Exit procedure” for the function operations.