Fujitsu D1241 User Manual

4. BIOS SETUP

Power Up Control

This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system off and [Previ-
ous State] sets your system back to the state it is in before the power inter-
ruption. Configuration options: [Disabled] [Previous State]

This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the modem receives a call while the computer is in Soft-off
mode. NOTE: The computer cannot receive or transmit data until the com-
puter and applications are fully running. Thus connection cannot be made
on the first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that will also cause the system
to power on. Configuration options: [Disabled] [Enabled]

Wake-On-LAN/PCI Modem allows your computer to be booted from an-
other computer via a network by sending a wake-up frame or signal. Con-
figuration options: [Disabled] [Enabled]

 This feature requires an optional network interface card with Wake-

On-LAN and an ATX power supply with at least 720mA +5V standby power.

4.5.1 Power Up Control