Fujitsu FR81S User Manual

Page of 2342
CHAPTER 41: CAN 
 
 
4. Registers 
 
FUJITSU SEMICONDUCTOR LIMITED 
CHAPTER
 : CAN 
FUJITSU SEMICONDUCTOR CONFIDENTIAL 
43 
MDir: Message direction mask bit 
MDir 
Function 
Masks the message direction bit (Dir) in the acceptance filter. 
Does not mask the message direction bit (Dir) in the acceptance filter. 
Note:   
Always set the MDir bit to "1". 
 
EoB: End of Buffer bit (see "5.4. FIFO Buffer Function " for details) 
EoB 
Function 
Indicates that the massage object is used as FIFO buffer and is not the final message. 
Indicates a single message object or the final message object of FIFO buffer. 
Notes: 
 
The EoB bit is used to configure the FIFO buffer of 2 to 32 messages. 
 
Always set the EoB bit to "1" in the case of a single message object (when FIFO is not used). 
 
NewDat: Data update bit 
NewDat 
Function 
Valid data does not exist. 
Valid data exists. 
 
MsgLst: Message lost 
MsgLst 
Function 
No message lost occurs. 
Message lost occurs. 
Note: 
The MsgLst bit is only enabled when the Dir bit is "0" (reception direction). 
 
RxIE: Reception interrupt flag enable bit 
RxIE 
Function 
The IntPnd remains unchanged after successful frame reception. 
The IntPnd is set to "1" after successful frame reception. 
 
MB91520 Series
MN705-00010-1v0-E
1736