EVGA X58 FTW3 User Manual
EVGA FTW3 Motherboard
13
1 - I/O Shield
Installs in the system case to block radio frequency
transmissions, protect internal components from dust, foreign
objects, and aids in proper airflow within the chassis.
Installs in the system case to block radio frequency
transmissions, protect internal components from dust, foreign
objects, and aids in proper airflow within the chassis.
3 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a SATA power
connector.
Allows a Molex power connector to adapt to a SATA power
connector.
1 - IEEE1394a (Firewire) Bracket
Provides one (1) additional IEEE1394a port to the back panel
of the chassis.
Provides one (1) additional IEEE1394a port to the back panel
of the chassis.
1 - 4-Port USB 2.0 Bracket
Provides four additional USB ports to either the front or back
panels of the chassis.
Provides four additional USB ports to either the front or back
panels of the chassis.
6 - SATA Data Cables
Used to support the SATA protocol and each one connects a
single drive to the motherboard.
Used to support the SATA protocol and each one connects a
single drive to the motherboard.
1 - IDE Data Cable
Passes data between the IDE connection on the motherboard
and IDE device.
Passes data between the IDE connection on the motherboard
and IDE device.
1 - 2-Way SLI Bridge
Bridges two (2) graphic cards together which allows for
2-Way SLI.
Bridges two (2) graphic cards together which allows for
2-Way SLI.
1 - 3-Way SLI Bridge
Bridges three (3) graphic cards together which allows for
3-Way SLI.
Bridges three (3) graphic cards together which allows for
3-Way SLI.
1 - Installation CD
Contains drivers and software needed to setup the
motherboard.
Contains drivers and software needed to setup the
motherboard.