Fujitsu GranPower7000 (GP 7000F) User Manual

5.6 Installation

IMPORTANT

High Leakage Current may flow through Power Strip Earthing Conductor, if all power

supply cords of this unit are connected to one Power Strip. Earth connection essential

before connecting supply.

Table 5.4

Mounting Combination for Expansion Rack

Rack-Mount Units

Mounting Portion Priority in the Rack

Expansion File Unit Type-2

Disk Array Unit (GP-DxxxxU)

Disk Array Unit (GR700/720)

GP7000F Model 200R/400R

Outlet and/or Outlet Type-2

Upper

Lower

Communication Swichable Unit

GP7000F Model 600R

Note:

Each rack-mount unit should be mounted in the lowest available portion with the

priority indicated in the Table 5.4 .

Notes on Installation

Do not install this file unit where it will be exposed to sunlight or sources of heat.

Do not install this file unit in dusty places or places where it will be exposed to corrosive gas or

sea breeze.

Keep this file unit isolated from vibration. Install this file unit on a level surface to prevent it

from tilting.

Do not run a cable under a unit or overextend a cable. Do not disconnect the power cable while

the power is on.

Do not place anything on this file unit. Do not use this file unit as a desk.

To prevent condensation in this file unit, do not raise the room temperature rapidly in the winter.

Use the cabinet only after sufficiently warming it.

Do not install this cabinet near noisy devices such as a photocopier, air conditioner, or welder.

Take electrostatic prevention measures. Note that some carpets generate static electricity easily

and can cause this file unit to malfunction.

IMPORTANT

If the above conditions are not satisfied, this file unit may be damaged. Be sure to follow

above precautions.