Fujitsu M600R User Manual

CHAPTER 6 M600 Main Cabinet

Panel cover

The panel cover can be opened from its right side after unlocking it. Then you can access switches

on the operator panel, CD-ROM unit, Floppy drive unit, tape unit, and so on.

Fans

The Table 6.1 lists the fans installed in the M600 main cabinet.

Table 6.1

Fans

Name Tray # Location

Fan #0 Tray #01 Upper, Left (front view) of the cabinet

Fan #1

Fan #2

Fan #3 Tray #02 Upper, Right (front view) of the cabinet

Fan #4

Fan #5

Fan #6 Tray #03 Bottom, Left (front view) of the cabinet

Fan #7

Fan #8

Fan #9

Fan #10 Tray #04 Bottom, Right (front view) of the cabinet

Fan #11

Fan #12

Fan #13 Tray #05 Upper, Center Left-hand (front view) of the cabinet

Fan #14 Tray #06 Upper, Center Right-hand (front view) of the cabinet

Fan #15 Tray #07 Bottom, Left (rear view) of the cabinet

Fan #16

Fan #17 Tray #08 Bottom, Left (rear view) of the cabinet

Fan #18

Fan #19 Tray #09 Bottom, Right (rear view) of the cabinet

Fan #20

Fan #21 Tray #10 Bottom, Right (rear view) of the cabinet

Fan #22

Power supplies

The M600 main cabinet has 2 kinds of power supply units as well as DDC (DC-DC Converter)

dedicated each processor module. FEP (Front End Bulk Power) unit has AC input, and provide

+45V(to PPU) and +5V(to SCF). PPU (Power Processing Unit) has +45V input, and provide +12V

or +5V or +3.3V or +2V to some internal components. The power supplies must be configured

according to the system hardware configuration as described in Table 6.2 .