Gateway ALR 9200 User Manual

EMP Access Modes: Choose either disabled, pre-boot, or always active, 
depending on the type of EMP access needed. Table 29 on page 132 and 
Table 30 on page 132 list what is available with a given setting.

EMP Restricted Mode Access: Set restricted mode to either enabled or 
disabled. In enabled mode, the EMP console server control options, Power 
On/Off and Reset, are NOT available. In disabled mode, these options are 
available.

EMP Direct Connect/Modem Mode: Select 

 if a null 

modem serial cable directly connects the server COM2 port to the EMP 
console client machine. If they are connected via a modem, select 

.

Console Redirection Submenu

To use the EMP, you must set the following options exactly as noted.

COM Port Address: Select 2F8. This is the COM2 port that the EMP must 
use. The IRQ# setting is automatically assigned with the correct number 
based on the COM port address choice.

Baud Rate: Select 19.2k.

Console Type: Choose PC ANSI.

Flow Control: Choose CTS/RTS + CD.

The main EMP console window provides a graphical user interface (GUI) 
to access server control operations and to launch the management plug-ins. 
A menu and tool bar at the top of the GUI provide options to initiate plug-
ins and other support features. A status bar at the bottom displays 
connection information like server name, line status, and mode.

3424.boo  Page 134  Wednesday, September 2, 1998  9:23 AM