Fujitsu PG-LND101 User Manual
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
1 1Gbit/s Ethernet I/O Module
49
E
1.2
Specifications
`
A server blade installed with a 1Gbit/s Ethernet I/O Module and a server blade
installed with a 2Gbit/s FC I/O Module cannot be installed to the same chassis.
installed with a 2Gbit/s FC I/O Module cannot be installed to the same chassis.
`
When a Switch Blade or a GbE Pass-Thru Blade is installed to network blade slot 3
or 4 (NET3 or 4), a FC Pass-Thru Blade cannot be installed at the same time.
or 4 (NET3 or 4), a FC Pass-Thru Blade cannot be installed at the same time.
Item
Specifications
Product ID
PG-LND101
Host bus
specifications
specifications
Interface
PCI-X bus Rev.1.0a, PCI bus Rev.2.3 (Compatible with logical
specifications) 64 bit/133MHz
Data transfer rate
Max. 1GB/sec. (At PCI-X bus 133MHz operation) *1
Data transfer system
Bus master, DMA
External interface
1000BASE-T Ethernet (SerDes) interface (Maximum transfer speed
at the chassis internal connection is fixed to 1Gbps)
Controller LSI
Intel(R) 82546GB, dual port
Applicable model
BX620 S2 Server Blade
*1: It varies depending on the PCI-X bus operation speed of the server blade daughter card slot. For example,
when PCI-X bus clock frequency is 100MHz, the data transfer speed of the 1Gbit/s Ethernet I/O Module is
maximum 800MB/sec (at peak).
maximum 800MB/sec (at peak).