Genicom P45 User Manual
English
E
10
English
Chapter 2 - Hardware Installation
Jumper Settings
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
c) The overclocked settings in the BIOS resulted to the system’s in-
b) You forgot the supervisor or user password.
c) The overclocked settings in the BIOS resulted to the system’s in-
stability or caused system boot up problems.
you can reconfigure the system with the default values stored in the
ROM BIOS.
ROM BIOS.
JP8 is accessible from the rear panel of the system. This provides
convenience by allowing you to clear the CMOS without having to
remove the chassis cover.
convenience by allowing you to clear the CMOS without having to
remove the chassis cover.
Clear CMOS Data
Clearing CMOS Data using Jumpers
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
JP2
JP8
X
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
1
3
2
1
3
2
X
3
1
2
3
1
2