Omron C200HE User Manual

I/O word number

I/O type: I, O

i, o (see tables on previous page)

Unit number (0 to 9)

Remote I/O Slave Unit number (0 to 4)

Remote I/O Master Unit number (0 or 1)

Indicates a Remote I/O Rack

00000IOTBL  READ
R**Ć*U=****  ***

Unit number (0 to F)

Indicates Group-2 HIgh-density I/O Unit

00000IOTBL  READ
  *Ć*U=#***

2: 

2 words (32 points)

4:

4 words (64 points)

I: Input 

Unit

O:

Output Unit

I/O word number (200 to 231)

I/O type: I (input), O (output), or

W (input/output)

Remote I/O Master Unit number (0 to 1)

Word (H: leftmost 8 bits; L: rightmost 8 bits)

00000IOTBL  READ
 2**HU=R*Ć*

The I/O Table Clear operation is used to delete the contents of the I/O table that
is currently registered in the CPU Unit memory. The PC will be set for operation
based on the I/O Units mounted when the I/O Table Clear operation is per-
formed.

The I/O Table Clear operation will reset all Special I/O Units and Link Units
mounted at the time. Do not perform the I/O Table Clear operation when a Host
Link Unit, PC Link Unit, Remote I/O Master Unit, High-speed Counter Unit, Posi-
tion Control Unit, or other Special I/O Unit is in operation.

Note This operation can be performed only in PROGRAM mode with the write-protec-

tion switch (pin 1 of the CPU Unit’s DIP switch) set to OFF (OFF=“WRITE”).