Advantech 2006957006 5th Edition User Manual

PCM-9570/S  User's Manual

The PCM-9570/S is equipped with a high performance 32-bit
Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps
CSMA/CD standards. It is supported by major network operating
systems. It is also both 100Base-T and 10Base-T compatible. The
medium type can be configured via the RSET8139.exe program
included on the utility disk.

The Ethernet port provides a standard RJ-45 jack on board. The
network boot feature can be utilized by incorporating the boot ROM
image files for the appropriate network operating system. The boot
ROM BIOS files are combined with system BIOS, which can be
enabled/disabled in the BIOS setup.

Before installing the Ethernet driver, note the procedures below. You
must know which operating system you are using in your
PCM-9570/S, and then refer to the corresponding installation flow
chart. Then just follow the steps described in the flow chart. You will
quickly and successfully complete the installation, even if you are not
familiar with instructions for MS-DOS or Windows.

Note:

The windows illustrations in this chapter are

examples only. You must follow the flow chart
instructions and pay attention to the instructions
which then appear on your screen.

If you want to set up your Ethernet connection under the MS-DOS or
Windows 3.1 environment, you should first check your server system
model. For example, MS-NT, IBM-LAN server, and so on.

Then choose the correct driver to install in your panel PC.

The installation procedures for various servers can be found on
CD-ROM, the correct path being:
D:\Biscuit\9570\Lan.100\8139B\wfw311