Advantech PCA-6186 User Manual
PCA-6186 User’s Manual
40
3.7.10 PowerOn By Modem
When Enabled, an input signal on the serial Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from a
soft off state. The choices: Enabled, Disabled.
other words, an incoming call on the modem) awakens the system from a
soft off state. The choices: Enabled, Disabled.
3.7.11 PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.
time clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.
3.7.12 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.
3.7.13 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.
port, or LPT port is active. The choice: Enabled, Disabled.
3.7.14 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.
occurs. The choice: Enabled, Disabled.
Figure 3.8: Power management setup screen (2)