Advantech DVMB-554E User Manual

 

46

3.4.8 Boot Up NumLock Status 

Sets the boot up status Num Lock. The options are “On” and “Off”. 

 

3.4.9 Gate A20 Option 

“Normal”: A pin in the keyboard controller controls GateA20. Fast 
(Default) lets chipset control GateA20. 

 

3.4.10 Typematic Rate Setting 

The typematic rate is the rate key strokes repeat as determined by the key- 
board controller. The commands are “Enabled” or “Disabled”. Enabling 
allows the typematic rate and delay to be selected. 

 

3.4.11` Typematic Rate (Chars/Sec) 

The BIOS accepts the following input values (characters/second) for 
typematic rate: 6, 8, 10, 12, 15, 20, 24, and 30. 

 

3.4.12 Typematic Delay (msec) 

Typematic delay is the time interval between the appearances of two con- 
secutive characters, when the key is continuously depressed. The input 
values for this category are: 250, 500, 750, and 1000 (ms). 

 

3.4.13 Security Option 

This category determines whether the password is required when the sys- 
tem boots up or only when entering setup. The options are: 

•   System: The system will not boot, and access to Setup will be also 

denied unless the correct password is entered at the prompt. 

•   Setup: The system will boot, but access to Setup will be denied unless 

the correct password is entered at the prompt. 

 

 

TING in the main menu. Then, you will be asked 
to enter a password. Simply press <Enter> to 
disable security. When security is disabled, the 
system will boot and you can enter Setup freely. 

 

 

3.4.14 APIC Mode 

This setting allows you to enable the APIC mode. The choices are “Dis- 
abled” or “Enabled.”