Advantech DVMB-554E User Manual
58
3.7.6 Suspend Type
The choices are “Stop Grant” and “PwrOn Suspend”.
3.7.7 Modem Use IRQ
This determines the IRQ that the MODEM can use.The choices are “3”,
“4”, “5”, “7”, “9”, “10”, “11”, and “NA”.
“4”, “5”, “7”, “9”, “10”, “11”, and “NA”.
3.7.8 Suspend Mode
This item allows user to determine the time of system inactivity, all
devices except the CPU will be shut off.
devices except the CPU will be shut off.
3.7.9 HDD Power Down
This item allows user to determine the time of system inactivity, the
hard disk drive will be powered down.
hard disk drive will be powered down.
3.7.10 Soft-Off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch
but- ton once will switch the system to “system off” power mode. You
can choose “Delay 4 sec”. If you do, then pushing the button for more
than 4 seconds will turn off the system, whereas pushing the button
momentarily
(for less than 4 seconds) will switch the system to “suspend” mode.
but- ton once will switch the system to “system off” power mode. You
can choose “Delay 4 sec”. If you do, then pushing the button for more
than 4 seconds will turn off the system, whereas pushing the button
momentarily
(for less than 4 seconds) will switch the system to “suspend” mode.
3.7.11 PowerOn by LAN
This item allows you to power on the system by LAN. The choices are
“Enabled” and “Disabled”.
“Enabled” and “Disabled”.
3.7.12 CPU THRM-Throttling
This option controlls the CPU speed as a percentage of regular power.
the choices are 87.5%, 75%, 62.5%, 50%, 37.5%, 25% .12% and
12.5%.
the choices are 87.5%, 75%, 62.5%, 50%, 37.5%, 25% .12% and
12.5%.
3.7.13 PowerOn by Modem
To enabled or disable the function to power on the system via a
Modem connection from a remote host. The choice “Enabled” and
“Disabled”.
Modem connection from a remote host. The choice “Enabled” and
“Disabled”.
3.7.14 PowerOn by Alarm
The choices are “Enabled” and “Disabled”. Fields that follow
below indicate date of current month and time of alarm settings, if
enabled.
below indicate date of current month and time of alarm settings, if
enabled.
3.7.15 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) becomes active. The choices are
“Enabled” and “Disabled”.
IDE 0 (1) or Secondary IDE 0 (1) becomes active. The choices are
“Enabled” and “Disabled”.