Advantech MIC-3043 User Manual
MIC-3043 User Manual
14
Figure 2.5:IDE adaptor (type B
2.3.7 Configuring the built-in SATA for the RIO module
(MIC-3043D series)
(MIC-3043D series)
MIC-3043D has SATA versions that support a removable or hot-swappa-
ble HDD which depends on RIO module type. Hot-swappable mode must
use RIO module supporting SATA interface; conversely, IDE interface is
only for removable. The default setting is through IDE interface. There is
a DIP switch on HDD backplane for IDE/SATA selection. An illustration
of the switch location is shown in Figure 2-6 as below.
ble HDD which depends on RIO module type. Hot-swappable mode must
use RIO module supporting SATA interface; conversely, IDE interface is
only for removable. The default setting is through IDE interface. There is
a DIP switch on HDD backplane for IDE/SATA selection. An illustration
of the switch location is shown in Figure 2-6 as below.
Figure 2.6: The location of jumper switch
Figure 2.7: Setting table for IDE/SATA selection