Advantech Intel User Manual

Chapter 1  Hardware Configuration

• CPU: Intel

®

 Socket 370 Pentium

®

 III Coppermine CPU up to 700

MHz, Intel

®

 Socket 370 Celeron

TM

 CPU up to 566 MHz

• BIOS: Award BIOS (Intel

®

 FWH 4 Mb)

• Chipset: Intel

®

 810

• System bus frequency: 100/66 MHz

• Bus interface: 32-bit, 33 MHz, PICMG 2.0 compliant

• L2 cache: CPU built-in 256 KB (Pentium

®

 III) or 128 KB

(Celeron

™

) on die

• RAM: Two 168-pin DIMM sockets support up to 512 MB SDRAM

at 100 MHz, unbuffered

• EIDE interface: Handles up to 4 IDE HDDs or other IDE devices.

Supports PIO mode 4 and Ultra DMA/33, Ultra DMA/66 mode (via
J3 connector)

• FDD interface: Supports up to two floppy disk drives (via J3

connector)

• Parallel port: Configured to LPT1, LPT2, LPT3 or disabled.

Supports multi-mode parallel port (SPP/ECP/EPP)

• Serial ports: Two RS-232 ports with 16C550 UARTs.  MIC-3365

and MIC-3365D provides one serial port, and MIC-3365F provides
two serial ports on the front panel

• PCI Watchdog timer (MIC-3365D only): Can generate a system

reset. Time interval is from 1 to 63 seconds, jumperless with run-
time setup. To program the watchdog timer, refer to Appendix A,
"Programming the Watchdog Timer".

• Ethernet: Dual Intel

®

 82559 Fast Ethernet Controller Chips, 10/

100 Base-TX with RJ-45 connectors

• Keyboard/mouse connector: One 6-pin mini-DIN connector on the

front panel