Advantech AIMB-760 User Manual

Set hard disk boot device priority.

Enables or disables the virus warning.

Enabling this feature speeds up memory access. The commands are 
“Enabled” or “Disabled.”

While using a CPU with Hyper-Threading technology, you can select 
“Enabled” to enable Hyper-Threading Technology in an OS which sup-
ports Hyper-Threading Technology or select “Disabled” for other OSs 
which do not support Hyper-Threading technology.

This allows the system to skip certain tests to speed up the boot-up proce-
dure.

The BIOS tries to load the OS from the devices in the sequence set here. 
The options are: “Floppy”, “LS120”, “HDD-0”, “SCSI”, “CDROM”, 
“HDD-1”, “HDD-2”, “HDD-3”, “ZIP100”, “USB-FDD”, “USB-ZIP”, 
“USBCDROM”, “USB-HDD”, “LAN”, and “Disabled”.

Use this to boot another device. The options are “Enabled” and “Dis-
abled”.

If the system has two floppy drives, choose “Enabled” to assign physical 
drive B to logical drive A and vice-versa. The commands are “Enabled” 
or “Disabled”.

Selection of the command “Disabled” will speed the boot up. Selection of 
“Enabled” searches disk drives during boot up.

Sets the boot up status Num Lock. The options are “On” and “Off”.

“Normal”: A pin in the keyboard controller controls GateA20. Fast 
(Default) lets chipset control GateA20.