AMD XP-K7V400 User Manual

Page of 22
 12
English
<F6>
Gives the list of options available for each item
<F7>
Return to Optimized default values (not applicable to main
setup screen)
<F8>
 
Enters BIOSNow
 
! feature
<F9>
Displays system information
<F10>
Saves settings and exits setup
3.2.
 Standard CMOS Features
ø
 
Includes the settings for items such as date, time, floppy disk drive specifications, and
hard drives connected to the IDE interface.
Date (mm:dd:yy)
Allows you to setup the date in the mm:dd:yy fashion.
Time (hh:mm:ss)
Allows you to set up the date in the hh:mm:ss fashion.  The time must be entered in the
24-hour format.
IDE Primary Master(Slave) / IDE Secondary Master(Slave)
[IDE Device Setup]
IDE HDD Auto-Detection
Press "Enter" to select this option for automatic device
detection.
IDE Primary Master(Slave) / IDE Secondary Master(Slave) IDE Device Setup.  You can
use one of three methods:
Auto
Allows BIOS to automatically detect IDE devices during POST(default)
None
Select this if no IDE devices are used and the system will skip the
automatic detection step and allow for faster system start up.
Manual
User can manually input the correct settings
Access Mode
Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Hard drive information should be labeled on the outside drive casing.  Enter the
appropriate option based on this information.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Sat
, May 15 2004
Time (hh:mm:ss)
22:31:24
} IDE Primary Master
[None]
} IDE Primary Slave
[None]
} IDE Secondary Master
[None]
} IDE Secondary Slave
[None]
Drive A
[1.44M, 3.5"]
Drive B
[None]
Floppy 3 Mode Suport
[Disabled]
Holt On
[All, But Keyboard]
Base Memory
640K
Extended Memory
127M
Total Memory
128M
Item Help
Menu Level}
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
higf: Move             Enter: Select               +/-/PU/PD: Value      F10: Save     ESC: Exit         F1: General Help
F5: Previous Values           F6: Fail-Save Default          F7: Optimized Defaults