AMCC 9590SE-4ME User Manual
Chapter 2. CLI Syntax Reference
22
3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5
show alarms [reverse]
This command shows the alarms or AEN messages of all controllers in the
system. The default is to display the most recent message first. The reverse
attribute displays the most recent message last.
system. The default is to display the most recent message first. The reverse
attribute displays the most recent message last.
show diag
This command shows the diagnostic information of all controllers in the
system.
system.
show rebuild
This command displays all rebuild schedules for the 9000 controllers in the
system.
system.
The rebuild rate is also applicable for initializing, migrating, and recovery
background tasks.
background tasks.
Example:
//localhost> show rebuild
Rebuild Schedule for Controller /c0
========================================================
Slot
Day
Hour
Duration
Status
--------------------------------------------------------
1
Sun
12:00am
24 hr(s)
disabled
2
Mon
12:00am
24 hr(s)
disabled
3
Tue
12:00am
24 hr(s)
disabled
4
Wed
12:00am
24 hr(s)
disabled
5
Thu
12:00am
24 hr(s)
disabled
6
Fri
12:00am
24 hr(s)
disabled
7
Sat
12:00am
24 hr(s)
disabled
For additional information about rebuild schedules, see “/cx add
rebuild=ddd:hh:duration” on page 45, and see the discussion of background
tasks and schedules in 3ware Serial ATA RAID Controller User Guide.
rebuild=ddd:hh:duration” on page 45, and see the discussion of background
tasks and schedules in 3ware Serial ATA RAID Controller User Guide.