AMCC 9590SE-4ME User Manual
Chapter 2. CLI Syntax Reference
40
3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5
Recommendation: No need to update.
Given the above recommendation...
Do you want to continue ? Y|N [N]: y
Downloading the firmware from file /tmp/prom0006.img ... Done.
The new image will take effect after reboot.
force attribute is optional. If you include it, the compatibility checks are
bypassed.
bypassed.
/c
x
show alarms [reverse]
Asynchronous events (also referred to as AENs or alarms) are originated by
firmware and captured by their respective device drivers. These events reflect
warning, debugging, and/or informative messages for the end user. These
events are kept in a finite queue inside the kernel, awaiting extraction by user
space programs such as CLI and/or 3DM.
firmware and captured by their respective device drivers. These events reflect
warning, debugging, and/or informative messages for the end user. These
events are kept in a finite queue inside the kernel, awaiting extraction by user
space programs such as CLI and/or 3DM.
The /cx show alarms command displays all available alarms on a given
controller. The default is to display the most recent alarm or AEN message
first. The user can also use the [reverse] attribute to display the most recent
alarm or AEN message last.
controller. The default is to display the most recent alarm or AEN message
first. The user can also use the [reverse] attribute to display the most recent
alarm or AEN message last.
Alarms generated on 7000/8000 controllers do not have dates, so you will see
a '-' in the Date column. This means that it is not applicable. In addition,
alarm messages on 7000/8000 controllers contain the severity in the message
text, so the Severity column also shows a '-'.
a '-' in the Date column. This means that it is not applicable. In addition,
alarm messages on 7000/8000 controllers contain the severity in the message
text, so the Severity column also shows a '-'.
Typical output looks like:
tw_cli> /c1 show alarms reverse
Ctl Date Severity Message
--------------------------------------------------------------------------------------------
c1 [Fri Nov 28 04:26:31 2003] ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=2
c1 [Fri Nov 28 06:13:54 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 06:30:35 2003] INFO (0x04:0x003B): Background rebuild paused:unit=0
c1 [Fri Nov 28 06:33:00 2003] ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=0
c1 [Fri Nov 28 06:33:04 2003] ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=4
c1 [Fri Nov 28 06:33:46 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 06:37:58 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 07:51:34 2003] INFO (0x04:0x0005): Background rebuild done:unit=0
c1 [Fri Nov 28 07:59:43 2003] INFO (0x04:0x0005): Background rebuild done:unit=0
c1 [Mon Dec 1 02:26:12 2003] ERROR (0x04:0x0002): Degraded unit detected:unit=0, port=3
/c
x
show diag
This command extracts controller diagnostics suitable for technical support
usage. Note that some characters might not be printable or rendered correctly
(human readable). It is recommended to save the output from this command to
a file, where it can be communicated to technical support or further studied
with Linux utilities such as od(1).
usage. Note that some characters might not be printable or rendered correctly
(human readable). It is recommended to save the output from this command to
a file, where it can be communicated to technical support or further studied
with Linux utilities such as od(1).