AMCC 9590SE-4ME User Manual
Chapter 2. CLI Syntax Reference
52
3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5
having to specify it as a spare. It also means that if you accidentally
disconnect a drive (causing the controller to see it as a failed drive) and then
reconnect it, the controller will automatically try to use it again.
disconnect a drive (causing the controller to see it as a failed drive) and then
reconnect it, the controller will automatically try to use it again.
If the policy is off, spares are the only candidates for rebuild operations.
Example:
//localhost> /c0 set autorebuild=enable
Setting Auto-Rebuild Policy on /c0 to enable ... Done.
/c
x
start mediascan
This command applies only to 7000/8000 controllers. For 9000 series
controllers, use the verify command.
controllers, use the verify command.
This command provides media scrubbing for validating the functionality of a
disk, including bad block detection, remapping, and so forth. The command
starts a media scan operation on the specified controller /cx.
disk, including bad block detection, remapping, and so forth. The command
starts a media scan operation on the specified controller /cx.
/c
x
stop mediascan
This command applies only to 7000/8000 controllers.
This commands stops a media scan operation on the specified controller /cx.
(Media scans are started using /cx start mediascan.)
(Media scans are started using /cx start mediascan.)