AMCC 9000 User Manual
Installing the Driver on a System that Boots from a Different Device
www.3ware.com
57
To install the 3ware driver under Windows 2000
When you start Windows after installing a 3ware RAID controller,
Windows recognizes it as a Plug and Play device, and brings up the
Found New Hardware Wizard. This wizard guides you through
installing the 3ware drivers (see Figure 17). Note that you will see
screens for the installation of two drivers during this process.
Windows recognizes it as a Plug and Play device, and brings up the
Found New Hardware Wizard. This wizard guides you through
installing the 3ware drivers (see Figure 17). Note that you will see
screens for the installation of two drivers during this process.
Figure 17. Found New Hardware Wizard, Windows 2000
1
Click the Next button and respond to the questions the Wizard
displays using the default selections.
displays using the default selections.
2
When the Wizard prompts you to select a device driver, click
Have Disk, and then indicate that it is on the CD or floppy.
Have Disk, and then indicate that it is on the CD or floppy.
3
If the “Digital Signature Not Found” message appears, click
Yes to continue the installation.
Yes to continue the installation.