AMD 7ZX-1 User Manual
7ZX-1 Motherboard
33
Integrated Peripherals
Figure 9: Integrated Peripherals
This items will be available when ”Serial PortB Mode” is set to IrDA or ASK IR.
♦
These eight items will be shown when there are only AC’97 CODEC sound.
•
On Board Serial Port A
Auto
BIOS will automatically setup the port A address.
(Default Value)
(Default Value)
3F8/COM1
Enable on Board Serial port A and address to 3F8.
2F8/COM2
Enable on Board Serial port A and address to 2F8.
3E8/COM3
Enable on Board Serial port A and address to 3E8.
2E8/COM4
Enable on Board Serial port A and address to 2E8.
Disabled
Disable on Board Serial port A.
•
On Board Serial Port B
Auto
BIOS will automatically setup the port B address.
(Default Value)
(Default Value)
3F8/COM1
Enable on Board Serial port B and address to 3F8.
2F8/COM2
Enable on Board Serial port B and address to 2F8.
3E8/COM3
Enable on Board Serial port B and address to 3E8.
2E8/COM4
Enable on Board Serial port B and address to 2E8.
Disabled
Disable on Board Serial port B.
•
Serial Port B Mode
Normal
Normal operation. (Default Value)
IrDA
Onboard I/O chip supports IRDA
ASK IR
Onboard I/O chip supports ASK IR.
•
Duplex Mode
Half Duplex
IR Function Duplex Half.
N/A
Disabled this function. (Default Value)
Full Duplex
IR Function Duplex Full.
•
On Board Parallel port
378
Enable On Board LPT port and address to 378.
278
Enable On Board LPT port and address to 278.
3BC
Enable On Board LPT port and address to 3BC.
Auto
Set On Board LPT port to Auto. (Default Value)
Disabled
Disable On Board LPT port.
AMIBIOS SETUP – INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port A
Auto
OnBoard Serial Port B
Auto
Serial PortB Mode
Normal
Duplex Mode
N/A
OnBoard Parallel Port
Auto
Parallel Port Mode
ECP
Parallel Port DMA
Auto
Parallel Port IRQ
Auto
AC97 Audio
Auto
MC97 Modem
Auto
♦
OnBoard Legacy Audio
Enabled
♦
Sound Blaster
Disabled
♦
SB I/O Base Address
220h-22Fh
♦
SB IRQ Select
5
♦
SB DMA Select
1
ESC: Quit
↑↓→
←
: Select Item
♦
MPU-401
Disabled
F1 : Help PU/PD+/-/ : Modify
♦
MPU-401 I/O Address
330h-333h
F5 :Old Values (Shift)F2:Color
♦
Game Port(200h-207h)
Enabled
F6 : Load BIOS Defaults
F7 : Load SETUP Defaults
F7 : Load SETUP Defaults