Areca ARC-1130 User Manual

122

and a supported browser. A locally managed system requires all 

of the following components:

• A supported Web browser, which should already be installed on  

  the system.

• Install ArcHttp proxy server on the SATA RAID system. (Refer to  

   Chapter 5, Archttp Proxy Server Installation)

• Remote and managed systems must have a TCP/IP connection. 

For windows, if there is no volume set created by the MC-

BIOS manager, Archttp program can not find raid card. It 

will show "0 controllers found". From the version 1.71 of the 

Archttp and the version 1.20.00.13 of the driver, users no 

longer need to have a "valid raid volume" created in order to 

managed controller.   

To configure the internal SATA RAID controller.  You need to know 

its IP Address. 

(1).  Launch  your  McRAID  Storage  Manager  by  entering  http://

[Computer IP Address]:[port number] in the web browser. 

(2). When connection is established, the System Login screen 

appears. The SATA RAID controller default User Name is “admin” 

and the Password is “0000”

Screen captures in this section are taken from a Windows XP 

installation. If you are running another version of Windows, your 

screens may look different, but the ArcHttp proxy server installa-

tion is essentially the same. 

 1. To start the McRAID Storage Manager for browser-based 

management, selecting Controller#01(PCI) and then click the 

Start Button.