Areca ARC-1130 User Manual

157

• Humidity: 45-85%, non-condensing

Electrical

• Input Voltage

+3.6VDC

• On Board Battery Capacity

1000mAH (1*1000mAH)

1. Make sure all power to the system is disconnected.

2. Connector J1 is available for the optional battery backup 

module. Connect the BBM cable to the 12-pin battery connector 

on the controller.

3. Integrators may provide pre-drilled holes in their cabinet for 

securing the BBM using its three mounting positions. 

Battery backup capacity is defined as the maximum duration 

of a power failure for which data in the cache memory can be 

maintained by the battery. The BBM’s backup capacity varied 

with the memory chips that installed on the SATA RAID control-

ler.