Areca ARC-1231ML/1261ML/1280ML User Manual

HARDWARE INSTALLATION

SNMP Manager Console Integration

• Out of Band-Using Ethernet port (12/16/24-port Control-

ler)

Before launching the firmware-embedded SNMP agent in the

sever, you need first to enable the fireware-embedded SNMP

agent function on your SATA RAID controller. If you need

additional information about installation and start-up this

function, see the section 6.8.4 SNMP Configuration (12/16/24-

port)

• In-Band-Using PCI-X/PCIe Bus (4/8/12/16/24-port

Controller)

Before launching the SNMP agent in the sever, you need first to

enable the fireware-embedded SNMP community configuration

and install Areca SNMP extension agent in your server system.

If you need additional information about installation and start-up

the function, see the SNMP Operation & Installation section in the

Appendix C

Single Admin Portal (SAP) Monitor

This utility can scan for multiple RAID units on the network and

monitor the controller set status. It also includes a disk stress test

utility to identify marginal spec disks before the RAID unit is put

into a production environment.

For additional information, see the utility manual in the packaged

CD-ROM or download it from the web site http://www.arec.com.tw