Symmetricom 1100 User Manual

Chapter 4 Provisioning the TimeProvider
Managing the User List

 TimeProvider User’s Guide

Adding a User at the Security Access Level
To define a user at the Security access level, issue the following TL1 command. The 
user and password you create is the same user and password used to access the 
TimeProvider using the SynCraft application (see 

ENT-USER-SECU::DEPTHEAD:TS1000::TP01!,SECURITY;

This sample command creates a user with the name DEPTHEAD and a password 
of TP01!; this user is at the Security access level. See 

, on page 98, 

for more information on the ENT-USER-SECU command.

TP-SSU 03-05-15 09:59:09

A 1166 REPT EVT

“IMC:NA,USRADD,NSA,03-05-15,09-59-09:\”USER HAS BEEN ADDED\””

;

Logging In
You can now log in using the ACT-USER command and the new user name and 
password to continue with the provisioning process.

ACT-USER::DEPTHEAD:TS1000::TP01!;

TP-SSU 03-05-15 09:59:15

M

TS1000 COMPLD

;

Users with the Security access level can issue any of the TL1 commands described 
in this chapter and in the TimeProvider TL1 Reference Guide.

Use the procedures in this section to manage the users that are authorized to 
access the TimeProvider.

Use the following TL1 command to log existing users into the system.

ACT-USER:[<tid>]:<uid>:[<ctag>]::<pid>;

This command has a default access level of NONE.